Electronics, Engineering, Experiments, Milestones, Physics

More Engineering. RAM Ready in the simulated 8-bit computer project in Circuitverse.

In October and early November, Simon was busy with another attempt to simulate SAP-1 (simple as possible processor, an 8-bit computer) in Circuitverse (something that he hadn’t managed to complete when he tried it last time). I’m not even sure if anyone uses Circuitverse for such large-scale projects.

Main

On November 7, Simon finally managed to finish the RAM on his simulated 8-bit computer (a computer where every general-purpose register contains 8 bits and therefore can only process 8 bits of data)! Although he is far from the end of the project, he is convinced that the RAM is the hardest part, so “now everything is going to be okay!”

“RAM was the hardest mainly because I have been trying to build the subcircuit for the RAM myself, which is not going to do it for SAP-2”,(Simon’s next ambition, also an 8-bit computer but with 64K memory, 2K PROM + 62K RAM). “This time the RAM I needed was particularly small, so I built a mini-RAM myself”.

The most difficult part, half of the mini-RAM. It doesn’t contain 16 bites, it contains 16 4-bit words or “nibbles” of memory

You can view and launch this (unfinished) project via this link: https://circuitverse.org/users/7241/projects/35775

All of Simon’s projects on his Circuitverse page: https://circuitverse.org/users/7241

Simon’s current plan is to record a series of videos based on the Digital Computer Electronics book he uses as a guide in his engineering projects.

Simon compiling a plan (in Microsoft Paint) based on the Digital Computer Electronics book contents

These are some simpler circuits from late September, simulated on Tinkercad:

Test circuit in Tinkercad on 30 September 2019
Test circuit in Tinkercad on 30 September 2019
JK Flipflop to create simple clock module in Tinkercad on 30 September 2019
Computer Science, Crafty, Electricity, Electronics, Engineering, Logic, Milestones, motor skills, Simon teaching

Simon building an 8-bit Computer from scratch. Parts 1 & 2.

Parts 1 and 2 in Simon’s new series showing him attempting to build an 8-bit computer from scratch, using the materials from Ben Eater’s Complete 8-bit breadboard computer kit bundle.

Simon is learning this from Ben Eater’s playlist about how to build an 8-bit computer.

In Part 1, Simon builds the clock for the computer
In Part 2, Simon builds the A register (more registers to follow).
these little black things are an inverter (6 in one pack), AND gate and OR gate (4 AND and OR gates in one pack)
this schematic represents the clock of the future 8-bit computer
Simon and Neva thought the register with its LED lights resembled a birthday cake